3D打印多通道施源器在宫颈癌术后患者近距离治疗中研究

doi:10.3760/cma.j.cn113030-20210712-00257

摘要
图/表
参考文献
相关文章 (15)
点击分布统计
下载分布统计

全文: PDF (0 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS) 背景资料

摘要目的比较3D打印多通道施源器与常规阴道单通道施源器用于近距离治疗的剂量学差异,为宫颈癌术后患者的近距离治疗提供一定的指导依据。方法选取25例自2019年1月—2020年11月接受¹⁹²Ir高剂量率近距离治疗的宫颈癌术后合并阴道上皮内瘤变Ⅲ级的患者,每位患者均采用3D打印多通道施源器和常规阴道单通道施源器进行CT扫描定位,并制定相应计划及评估,运用逆向剂量优化算法计算后得出剂量体积直方图,比较两组施源器用于近距离治疗时的高危临床靶区、膀胱及直肠受照剂量的差异,选择最优计划实施治疗。结果采用3D打印个体化多通道施源设计计划的D90%、D100%、V100%、V150%与常规单通道施源器设计的计划相比,差异均无统计学意义(P>0.05);膀胱、直肠的D2cm³与常规相比均明显降低,差异有统计学意义(均为P<0.05)。结论采用3D打印技术制作的多通道个体化施源器靶区适形性好,可更好地保护膀胱和直肠,有一定的治疗优势。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	唐成琼
	刘江平
	古丽娜·库尔班
	刘浩
	曹耀峰
	张小芳
	钟薇

关键词 ： 3D打印, 多通道施源器, 近距离治疗, 逆向剂量优化

Abstract：Objective To compare the dosimetric difference between 3D-printed multi-channel applicator and conventional vaginal single-channel applicator for brachytherapy, aiming to provide guidance for patients receiving brachytherapy after cervical cancer surgery. Methods From January 2019 to November 2020, 25 cervical cancer patients complicated with VAIN Ⅲ receiving ¹⁹²Ir high-dose-rate brachytherapy after cervical cancer surgery were selected. Each patient was located by CT scanning with 3D-printed multi-channel applicator and conventional vaginal single-channel applicator, and corresponding plan and evaluation were carried out. The dose volume histogram (DVH) was obtained by inverse dose optimization algorithm. The dosimetric differences of high-risk clinical target volume (HRCTV), bladder and rectum during brachytherapy were compared with those of source applicators. The optimal treatment plan was selected. Results D90%, D100%, V100% and V150% of the plans designed by 3D-printed individual multi-channel applicator had no significant differences compared with those designed by conventional single-channel applicator (all P>0.05). The bladder and rectal D2cm³designed by 3D-printed multi-channel applicator were significantly lower than those using conventional single-channel applicator, and the differences were statistically significant (both P<0.05). Conclusion The multi-channel individual applicator target made by 3D-printing technology has good conformal property, properly protects the bladder and rectum and possesses treatment advantages over conventional single-channel applicator.

Key words： 3D printing Multi-channel applicator Brachytherapy Inverse dose optimization

收稿日期: 2021-07-12

基金资助:新疆维吾尔自治区科技计划项目(2019D01C254)

通讯作者: 钟薇,Email:68056068@qq.com

引用本文:

唐成琼,刘江平,古丽娜·库尔班等. 3D打印多通道施源器在宫颈癌术后患者近距离治疗中研究[J]. 中华放射肿瘤学杂志, 2022, 31(5): 445-449.

Tang Chengqiong,Liu Jiangping,Gulina Kuerban et al. Study of 3D-printed multi-channel applicator in patients treated with brachytherapy after cervical cancer surgery[J]. Chinese Journal of Radiation Oncology, 2022, 31(5): 445-449.

链接本文:

http://journal12.magtechjournal.com/Jweb_fszlx/CN/10.3760/cma.j.cn113030-20210712-00257 或 http://journal12.magtechjournal.com/Jweb_fszlx/CN/Y2022/V31/I5/445

[1] Yang H, Hu H, Gou Y, et al. Combined detection of Twist¹, Snail1 and squamous cell carcinoma antigen for the prognostic evaluation of invasion and metastasis in cervical squamous cell carcinoma[J]. Int J Clin Oncol, 2018, 23(2):321-328. DOI:10.1007/s10147-017-1210-2.
[2] Lee YS, Kim YS, Kim JH, et al. Feasibility and outcome of concurrent chemoradiotherapy for recurrent cervical carcinoma after initial surgery[J]. Tumori, 2010, 96(4):553-559.
[3] Abe A, Matoda M, Okamoto S, et al. Resection of the vaginal vault for vaginal recurrence of cervical cancer after hysterectomy and brachytherapy[J]. World J Surg Oncol, 2015, 13:137. DOI:10.1186/s12957-015-0495-8.
[4] 李慧灵,林娴,陈文娟,等. 宫颈癌术后阴道断端复发的放疗疗效分析[J]. 中华放射肿瘤学杂志,2017,26(9):1028-1031. DOI:10.3760/cma.j.issn.1004-4221.2017.09.010.
Li HL, Lin X, Chen WJ, et al. Clinical efficacy of radiotherapy in treatment of recurrent lesions at vaginal cuff after hysterectomy for cervical cancer[J]. Chin J Radiat Oncol, 2017,26(9):1028-1031. DOI:10.3760/cma.j.issn.1004-4221.2017.09.010.
[5] Small JW, Beriwal S, Demanes DJ, et al. American Brachytherapy Society consensus guidelines for adjust vaginal cuff brachytherapy after hysterectomy[J].Brachytherapy, 2012, 11(1):58-67.
[6] Beriwal S, Demanes DJ, Erickson B, et al. American brachytherapy society consensus guidelines for interstitial brachytherapy for vaginal cancer[J]. Brachytherapy, 2012, 11(1):68-75. DOI:10.1016/j.brachy.2011.06.008.
[7] George E, Barile M, Tang A, et al. Utility and reproducibility of 3-dimensional printed models in pre-operative planning of complex thoracic tumors[J]. J Surg Oncol, 2017, 116(3):407-415. DOI:10.1002/jso.24684.
[8] 汤轶强,曾雷,敖帆, 等.3D 打印个体化施源器鼻咽癌腔内后装治疗应用初探[J]. 中华放射肿瘤学杂志,2020,29(3):211-214. DOI:10.3760/cma.j.issn.1004-4221.2020.03.012.
Tang YQ, Zeng L, Ao F, et al. Preliminary exploration of 3D printed individualized applicator for 3D-image-guided intracavitary HDR-brachytherapy for nasopharyngeal carcinoma[J]. Chin J Radiat Oncol, 2020,29(3):211-214. DOI:10.3760/cma.j.issn.1004-4221.2020.03.012.
[9] 孙海涛,姚丽红,王俊杰,等.3D打印非共面模板引导125 I粒子组织间近距离治疗盆腔肿瘤个体化设计[J]. 中华放射医学与防护杂志.2017,37(7):485-489. DOI:10.3760/cma.j.issn.0254-5098.2017.07.002.
Sun HT, Yao LH, Wang JJ, et al. 3D-printing non-coplanar template assisted ¹²⁵I seed implantation for pelvic tumor:individual template design method[J]. Chin J Radiologic Med Protect, 2017,37(7):485-489. DOI:10.3760/cma.j.issn.0254-5098.2017.07.002.
[10] 彭冉,姜玉良,吉喆,等.3D打印共面坐标模板辅助CT引导放射性125I粒子植入治疗恶性肿瘤剂量学分析[J]. 中华放射肿瘤学杂志.2017,26(9):1062-1065. DOI:10.3760/cma.j.issn.1004-4221.2017.09.016.
Peng R, Jiang YL, Ji Z, et al. CT-guided 125 I seed implantation with 3D printed coplanar coordinate template for malignant tumor dosimetry[J]. Chin J Radiat Oncol, 2017,26(9):1062-1065. DOI:10.3760/cma.j.issn.1004-4221.2017.09.016.
[11] 王皓,王俊杰,姜玉良. 等.3D打印模板联合CT引导125 I粒子治疗盆腔复发直肠癌的剂量学分析[J]. 中华医学杂志,2016,96(47):3782-3786. DOI:10.3760/cma.j.issn.0376-2491.2016.47.003.
Wang H, Wang JJ, Jiang YL, et al. Dosimetric analysis of 125 I seeds guided by 3D printing template and CT in the treatment of recurrent Pelvic rectal cancer[J]. Chin J Med, 2016,96(47):3782-3786.
[12] 曹强,霍彬,霍小东,等.3D打印共面模板辅助CT引导¹²⁵I粒子植入治疗非小细胞肺癌的剂量学研究[J]. 中华放射医学与防护杂志,2017,37(7):528-532. DOI:10.3760/cma.j.issn.0254-5098.2017.07.011.
Cao Q, Huo B, Huo XD, et al. Dosimetric study of 3D-printing coplanar template combined with CT-guided ¹²⁵I seed implantation for treating non-small cell lung cancer[J]. Chin J Radiologic Med Protect, 2017,37(7):528-532. DOI:10.3760/cma.j.issn.0254-5098.2017.07.011.
[13] Wiebe E, Easton H, Thomas G, et al. Customized vaginal vault brachytherapy with computed tomography imaging-derived applicator prototyping[J]. Brachytherapy, 2015, 14(3):380-384. DOI:10.1016/j.brachy.2014.12.006.
[14] Sethi R, Cunha A, Mellis K, et al. Clinical applications of custom-made vaginal cylinders constructed using three-dimensional printing technology[J]. J Contemp Brachytherapy, 2016, 8(3):208-214. DOI:10.5114/jcb.2016.60679.
[15] 袁香坤,崔芒芒,苗珺珺,等.3D打印微创导向模板在术后复发性宫颈癌近距离治疗中的临床应用[J]. 中国肿瘤临床,2018,45(24):1258-1262. DOI:10.3969/j.issn.1000-8179.2018.24.883.
Yuan XK, Chui MM, Miao JJ, et al. The clinical application of 3D-printed minimally-invasiveguided template in the inter-stitial brachytherapy treatment of postoperative recurrent cervical cancer[J]. Chin Oncol Clin, 2018,45(24):1258-1262. DOI:10.3969/j.issn.1000-8179.2018.24.883.
[16] 于浪,连欣, 晏俊芳,等.3 D打印技术在CT引导宫颈癌术后阴道残端肿瘤近距离治疗中应用[J]. 中华放射肿瘤学杂志, 2016, 25(9):965-967. DOI:10.3760/cma.j.issn.1004-4221.2016.09.013.
Yu L, Lian X, Yan JF, et al. Application of 3D printing technology in brachytherapy for vaginal stump tumor after CT-guided cervical carcinoma surgery[J]. Chin J Radiat Oncol,2016,25(9):965-967. DOI:10.3760/cma.j.issn.1004-4221.2016.09.013.
[17] 南贤秀,张洪明, 侯彦杰, 等. 3D 打印技术在放疗中的应用与进展[J]. 国际放射医学核医学杂志,2020,44(1):65-70. DOI:10.3760/cma.j.issn.1673-4114.2020.01.013.
Nan XQ, Zhang HM, Hou YJ, et al. Application and progress of 3D printing technology in radiotherapy[J]. Int J Radia Med Nucl Med, 2020,44(1):65-70. DOI:10.3760/cma.j.issn.1673-4114.2020.01.013.
[18] 张永侠,袁香坤,苗珺珺,等.3D打印模板应用于局部晚期宫颈癌后装放疗的剂量学研究[J]. 中华放射医学与防护杂志,2020,40(7):519-523. DOI:10.3760/cma.j.issn.0254-5098.2020.07.005.
Zhang YX, Yuan XK, Miao JJ. Dosimetric analysis of 3D-printed minimally invasive-guided template in the brachytherapy treatment of locally advanced cervical cancer[J]. Chin J Radiologic Med Protect, 2020,40(7):519-523. DOI:10.3760/cma.j.issn.0254-5098.2020.07.005.
[19] 王彬冰,郑光浩, 张翔, 等. 经阴道3D打印个体化模板在宫颈癌后装治疗中的应用价值研究[J]. 中华放射肿瘤学杂志,2020,29(4):283-287. DOI:10.3760/cma.j.cn113030-20190929-00007.
Wang BB, Zheng GH, Zhang X, et al. Application value of individualized 3D-printed vaginal template for cervical cancer brachytherapy[J]. Chin J Radiat Oncol, 2020,29(4):283-287. DOI:10.3760/cma.j.cn113030-20190929-00007.